Free resume exampleUpdated September 2026

⚡ Electrician resume example

A journeyman electrician resume example built to pass applicant tracking systems and read well to a contractor or facilities manager. It names the exact codes, tools, and license type employers search for, and turns every task into a measurable result: job sites completed, inspection pass rate, or years of safety record.

Free • Opens with the example filled in • Download as PDF after a free signup

This example contains 30 of 63 ATS keywords employers use for Electrician roles.

Keywords come from the same dictionary the 22skills ATS checker scores against. Matched terms are shown in green.

Example resume

Fictional example. Name, employers and numbers are invented; the structure and keywords are real.

Daniel Reyes

Journeyman Electrician · Residential & Commercial

Denver, United States

About

Journeyman Electrician with 8 years of experience wiring residential and commercial buildings across the Denver metro. Skilled in panel installation, conduit bending, and code-compliant work under the National Electrical Code (NEC), with a strong safety record and experience training apprentices on job sites.

Experience

Rocky Mountain Electrical Contractors· Journeyman ElectricianDenver, CO2021-06 – Present
- Install and troubleshoot electrical wiring and circuit installation in new residential and commercial builds, reading wiring diagrams daily.
- Perform conduit bending and panel installation for 15+ job sites a year, ensuring every job meets the National Electrical Code (NEC).
- Test circuits with a multimeter, performing voltage testing and grounding systems checks before energizing new panels.
- Pull permits and coordinate permit applications and code inspections with the city, maintaining a 100% pass rate over 3 years.
- Follow arc flash safety and OSHA compliance protocols on every site, training two apprentices on safe work practices.
Front Range Fire Protection· ElectricianDenver, CO2019-02 – 2021-05
- Installed fire alarm systems and low-voltage wiring in commercial buildings, passing every fire marshal inspection.
- Performed load calculations for panel upgrades in older residential wiring, avoiding overloaded circuits.
- Completed preventive maintenance rounds on commercial wiring and lighting systems for 20+ client accounts.
Summit Electrical Apprenticeship Program· Electrician ApprenticeDenver, CO2017-08 – 2019-01
- Assisted journeyman electricians with troubleshooting and prepared tools such as wire strippers and the conduit bender on job sites.
- Completed 8,000 hours of apprenticeship training covering electrical wiring and OSHA compliance fundamentals.

Education

Emily Griffith Technical College· Electrical Trade CertificateElectrical Technology2016-08 – 2017-06

Certifications

Journeyman Electrician License · Colorado Department of Regulatory Agencies (2021)
OSHA 10-Hour Certification · Occupational Safety and Health Administration (2020)
NFPA 70E Certification · National Fire Protection Association (2023)

Why this example passes the ATS

The headline and summary lead with the license type, "Journeyman Electrician", and the code standard, "National Electrical Code (NEC)", which is exactly what ATS filters and contractors search for first.
Bullets pair a task with a result, such as "maintaining a 100% pass rate over 3 years" on permit applications and code inspections, proving reliability with inspectors.
Skills are grouped into electrical systems, codes, tools, and specialties so a recruiter can confirm both hands-on and compliance experience at a glance.
Safety terms appear by name, "arc flash safety" and "OSHA compliance", which matches exactly how safety-focused electrical job postings screen candidates.
The apprenticeship entry still shows real tool and code experience, so the full career history reads as a licensed progression rather than a list of jobs.

Electrician ATS keywords in this example

Grouped the way the checker groups them. Green terms appear in the example above; grey ones are in the dictionary but not used here.

Electrical Skills & Systems

10/14

Electrical Wiring
Circuit Installation
Conduit Bending
Panel Installation
Troubleshooting
Blueprint Reading
Wiring Diagrams
Voltage Testing
Grounding Systems
Preventive Maintenance
Motor Controls
Transformer Installation
Lighting Installation
Cable Pulling

Codes & Compliance

7/10

National Electrical Code (NEC)
OSHA Compliance
Permit Applications
Code Inspections
Arc Flash Safety
NFPA 70E
Load Calculations
Local Building Codes
Electrical Safety Standards
Utility Coordination

Tools & Equipment

4/12

Multimeter
Voltage Tester
Wire Strippers
Conduit Bender
Ammeter
Oscilloscope
Power Tools
Hand Tools
Cable Tester
Thermal Imaging Camera
Torque Wrench
Fish Tape

Certifications & Licenses

3/9

Journeyman Electrician License
OSHA 10-Hour Certification
NFPA 70E Certification
Master Electrician License
OSHA 30-Hour Certification
EPA Universal Certification
Low Voltage Certification
Apprenticeship Completion Certificate
Certified Electrical Safety Compliance Professional (CESCP)

Specialties

3/9

Residential Wiring
Commercial Wiring
Fire Alarm Systems
Industrial Electrical Systems
Solar Panel Installation
Low Voltage Systems
HVAC Electrical Systems
Renewable Energy Systems
Generator Installation

Soft Skills

3/9

Problem Solving
Attention to Detail
Safety Consciousness
Communication
Time Management
Physical Stamina
Teamwork
Customer Service
Reliability

How to adapt this example to your own experience

1State your exact license type clearly, apprentice, journeyman, or master electrician, since contractors filter directly on license level.
2Keep the current role longest with four to five bullets, and shrink older roles to two or three bullets that still include a number.
3Name your specialty directly, residential, commercial, or industrial, and add solar or low-voltage systems if you have that experience.
4Quantify whatever you can measure: job sites per year, inspection pass rate, or accounts serviced.
5List every safety certification you currently hold, since OSHA and NFPA 70E credentials are heavily filtered on in electrical job postings.

Questions about the Electrician resume

How long should an electrician resume be?

One page covers most electricians with up to about ten years of experience. Lead with your license type and code compliance experience, since that is what contractors look for first.

Should I list the National Electrical Code (NEC) by name?

Yes. Naming the NEC directly, along with any local code experience, matches exactly what applicant tracking systems and hiring contractors search for in electrician postings.

What if I am still an apprentice and do not have a journeyman license yet?

List your apprenticeship hours and the specific tasks and tools you have used. Many entry-level electrician postings are written for apprentices, and the same code and safety keywords still apply.

Do I need to list every hand tool I own?

No. List the diagnostic and specialty tools relevant to the job, such as a multimeter or voltage tester, rather than every hand tool in your bag. A focused list is easier for both ATS and a hiring manager to read.

Make this Electrician resume yours

Open the example in the free builder, replace the details, and download an ATS-safe PDF. No credit card.